Chapter 1 Introduction; Mobile Radio Description; Dimensions - Motorola ASTRO XTL 2500 Installation Manual

Digital mobile radio m5 control head
Hide thumbs Also See for ASTRO XTL 2500:
Table of Contents

Advertisement

Chapter 1 Introduction

This manual covers the installation procedures for ASTRO XTL 2500 mobile radios with M5 control
heads and accessories required to complete the radio system. The radio system consists of a control
head, radio, antenna, microphone, speaker, cabling, and accessories.
1.1

Mobile Radio Description

1.1.1

Dimensions

Figure 1-1
and
2500 radio. The transceiver portion of a remote mount XTL 2500 is sized similarly.
When installing the radio, make sure to plan the installation carefully and leave additional room in the
rear of the radio for cabling and accessory connections; in the front of the radio for access, controls,
and cabling (if remote mount); and to the sides of the radio so that you may access and install the
trunnion wing screws.
Figure 1-1. Front View of Dash Mount
Transceiver Trunnion
NOTE: The rear accessory connector adds 0.75 in. to the overall length.
Figure 1-2
show the basic dimensions of the dash mount transceiver trunnion XTL
8.5"
7.1"
XTL 2500
XTL 2500
9.6"
9.1"
Figure 1-2. Side View of Dash Mount Transceiver
Trunnion
2"
3.5"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xtl2500

Table of Contents