Call Ringer; Keypad Lock - Albrecht Tectalk Smart + Series User Manual

•
Press the PTT button momentarily to confirm selection.

Call Ringer

The transceiver provides a transmit call ring melody to alert other
users of an incoming call. From standby mode, pressing the PTT
button twice in quick succession will transmit the call ringer melody.
To select the call ringer tone :
•
From standby mode, press the MODE Button 6 times unitil the
Call Ringer tone number flashes.
•
Press the Up or Down Button to select the one tone out of 3
tones.
•
Press the PTT button momentarily to confirm selection.

Keypad Lock

The lock function is to avoid the accidental changes of radio
settings. Only POWER On/Off,
buttons will operate while lock function is enabled.
To set the keypad lock operation :
•
From standby mode, press and hold the MODE button for 2
seconds or until the lock icon ( ) appears on the display.
•
To disable the lock operation, press and hold the MODE button
for at least 2 seconds ; the lock icon ( ) will disappear
Note: while the SCAN mode is active, the MODE button is
disabled. Please note that the SCAN mode will reduce the overall
battery life since the battery save function cannot be used during
scanning.
Channel Scan Operation
This feature allows you to monitor all channels automatically for
valid signals. While scanning, you can transmit and receive. When
the PTT and Volume Up/Down
10