Administration; Admin Menu Tree - Unify OpenStage WL3 Administration Manual

Configuration Manual
WL3 and WL3 Plus WLAN Handset
9.

Administration

9.1

Admin Menu Tree

The handset has a hidden menu for system administrators. The Admin menu contains:
• Software and hardware information
• WLAN, network, system, and license information
• Site survey tool
• Network setup menus
• Factory reset option
To activate the Admin Menu, select Menu > Settings and press 40022.
Figure 10. Admin Menu in the Handset.
• Device info
• Site survey tool
• Network setup
• WSG
• VoIP
• Syslog
• Logging
• Troubleshooting
• Enter license key
• Factory Reset
Other menus are described in User Manual, WL3 WLAN Handset and WL3 Plus WLAN
Handset, TD 92929EN.
13 December 2013 /Ver B
9. Administration
—>
• Software
• Hardware
• License
• WLAN info
• Network info
• User ID
—> • Show RSSI —> • On
• Off
• Scan all channels —> • Select
• Rescan
• Scan selected channel —>
• [Channel]
• On
• Range beep —>
• Off
• Range beep level —>
• [Level]
• Location Survey —>
• On
• Off
—> • Network name —> • [Network]
• IP addresses —> • DHCP Mode
• Static IP
• SSID —>
• [SSID]
• 802.11 protocol —>
• 802.11 b/g
• 802.11 b/g/n
• 802.11 a
• 802.11 a/n
• Security mode —>
• Open
• WEP
• WPA-PSK/WPA2-PSK
• IP address
—>
• Password
—>
• Endpoint Number
• Endpoint ID • [Endpoint ID]
• Protocol —> • SIP
—> —> • On
• Syslog mode
• Off
• Syslog server IP —> • [IP address]
—>
• Logging mode —>
• Trace
• RPCAP
• PCAP over USB
• Extended logging —>
• Phone
• SIP
—>
• On
• Network Traffic
• Off
—>
• [License key]
—>
• Yes
• No
TD 92930EN
—>
• Phone IP
• Subnet mask
• Default gateway
• Primary DNS IP
• TFTP
—> • SIP proxy IP address
• SIP proxy ID
• SIP proxy password
71