Safety Instructions - Polyprint TEXJET Operation Manual

2. Safety Instructions

Read these instructions
before operating
Follow the instructions given in this
manual or directly on the machine and
the accessories, to prevent damage to
the equipment or your health.
Warning, Cautions, and Notes
Warnings must be followed carefully
to avoid bodily injury.
Cautions must be observed to avoid
damage to your equipment
Notes contain important information
and useful tips on the operation of
your printer.
When choosing a place for this product
Place this product on a flat, stable
o
surface that extends around the
product. The surface should be at
least 85x130cm.
This product
o
properly if it is tilted or at an angle.
The printer must only be used
o
indoor
Avoid places
o
changes in
humidity. Also keep this product
away from direct sunlight, strong
light, or heat sources.
Avoid places subject to shocks and
o
vibrations.
Keep this product away from dusty
o
areas.
Place this product near a wall
o
outlet where the plug can be easily
unplugged.
If you use a stand, the stand must
o
be able to support at least 125Kg
(275lb).
Always put the printer into a place
o
where the lighting is sufficient.
Operate the
o
environment with a temperature
range of 10-30 degrees Celsius.
The humidity must be between 20-
80% none condensing.
The printer is not made for kids,
o
but only for professionals
carefully
the equipment.
will not operate
subject to rapid
temperature and
machine in an
POLYPRINT SA – TEXJET OPERATION MANUAL V6.4 EN
When setting up this product
Use the type of power source
o
indicated on this products label.
Do not use a damaged or frayed
o
power cord.
Connect all equipment to grounded
o
outlets. Do not use the same outlet
for any other system such as a
copy machine or an air control unit
that turn on and off.
Do not let the power cord be
o
damaged.
If you are using an extension cord
o
make sure the power ampere rate
does not exceed the cord ampere
rate of the product.
Keep electromagnetic devices and
o
other potential
magnetic fields away from your
product.
Caution: Do not unplug the printer
o
to shut is off. Use the power button
instead. Do not unplug the printer
until the power light is off.
Do not block any of the printer
o
vents or insert anything foreign in
its slots.
When using this product
Observe all relevant local, National
o
and International
connection with safety and this
machine. This includes electrical,
mechanical
issues.
Follow the advised schedule for
o
maintenance to guarantee smooth
operation of the equipment.
Do not insert object through the
o
slots. Take care not to spill liquid
on this product.
Always make sure that the print
o
head has a sufficient distance from
material you print on. A direct
contact between the print head and
the printing media may destroy the
print head.
Whenever performing maintenance
o
or service make sure to switch off
the machine and to disconnect the
power cord.
Always keep ink cartridges out of
o
the reach of children
- 5 -
sources with
regulations in
and environmental