1. Manuals
  2. Brands
  3. Alto Manuals
  4. Floor Machine
  5. Bext-100
  6. Operator's manual

Alto Bext-100 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bext-100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alto Bext-100

Summary of Contents for Alto Bext-100

  • Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
  • Page 2 All directions given in this book are as seen from the operator’s position at the rear of the machine. For new books write to: ALTO U.S. Inc., 2100 Highway 265, Springdale, Arkansas 72764. Form No. 70704A 1/04 CLARKE TECHNOLOGY Printed in the U.S.A.

  • Page 3: Table Of Contents

    -150/100 Wiring Diagram ................43 ® -150H/100H Connection Diagram ..............44 ® -150H/100H Wiring Diagram ................45 ® -300HV Connection Diagram ................46 ® -300HV Wiring Diagram .................. 47 ® ® Page 2 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 4 Gráfico de las conexiones eléctricas del modelo B -150H/100H ......45 ® Gráfico de las conexiones del modelo B -300HV ..........46 ® Gráfico de las conexiones eléctricas del modelo B -300HV ....... 47 ® ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 3...
  • Page 5 Schéma de connexion B -150H/100H ..............44 ® Schéma de câblage B -150H/100H ..............45 ® Schéma de connexion B -300HV ................ 46 ® Schéma de câblage B -300HV ................47 ® ® Page 4 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...

  • Page 6: Operator Safety Instructions

    Keep all fasteners tight. Keep the adjustments according to specifications. WARNING: Make sure that all the labels, decals, warnings, cautions and instructions are fastened to the machine. Replace them when necessary by ordering them from Clarke Technology. ° ° WARNING:...

  • Page 7: Introduction And Machine Specifications

    3. Do not allow children or pets to crawl or walk around on the damp carpet. 4. Vacuum right after the carpet is dry and then vacuum the carpet once a week as needed. ® Page 6 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 8 ADVERTENCIA: Compruebe que todas las etiquetas, calcomanías, advertencias, precauciones e instrucciones estén bien aseguradas a la máquina. Reemplácelas cuando sea necesario para lo cual debe solicitarlas a Clarke Technology. ADVERTENCIA: No utilice agua cuya temperatura supere los 120º F (40º C).
  • Page 9 No permita que los niños o las mascotas se arrastren ni caminen por la alfombra húmeda. Aspire la alfombra inmediatamente después de que se seque y luego aspírela una vez por semana según resulte necesario. ® Page 8 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 10 AVERTISSEMENT: Assurez-vous que toutes les étiquettes, décalcomanies, avertissements, indications et instructions sont bien fixés à la machine. Remplacez-les lorsque nécessaire en les commandant à Clarke Technology. AVERTISSEMENT: N'utilisez pas de l'eau d'une température supérieure à 40°C. AVERTISSEMENT: Si de la mousse ou du liquide sort de la machine, interrompez immédiatement l'extraction.
  • Page 11 Ne laissez pas des enfants ou des animaux marcher ou ramper sur de la moquette humide. spirez dès que la moquette est sèche puis aspirez la moquette une fois par semaine ou lorsque nécessaire. ® Page 10 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 12 NOTES ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 11...

  • Page 13: Controls And Machine Features

    The Machine Power Cord (Red Band) See Figure 1I This cord powers all machine functions except the heater. The Heater Power Cord See Figure 1J This cord powers heater only. Figure 2 ® Page 12 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 14 Relâchez le levier sur l'outil de sol pour de oprimir la palanca del accesorio para pisos. l'interrompre. NOTA: Mientras el modelo Bext-100 está en N.B.: Lorsque la machine BEXT-100 est en funcionamiento la bomba se apaga de manera fonctionnement, pompe s'éteindra...

  • Page 15: How To Prepare The Machine For Operation

    (See Figure 5 on next page 8) CAUTION: If both cords are plugged into the same circuit breaker, the breaker may blow when operating with the heater on. ® Page 14 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 16 PRECAUCIÓN: Si ambos cables están conectados al l'appareil de chauffage allumé. mismo disyuntor el mismo puede accionarse cuando funciona con el calentador encendido. ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 15...
  • Page 17 VACUUM SWITCH (1 &2): Each switch turns on one vac motor. Turn both switches on for maximum lift. The vac switches illuminate when turned on. PUMP SWITCH (3): This switch will illuminate when the pump is on. ® Page 16 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 18 COMMUTATEUR DE LA POMPE (3): Ce commutateur CONMUTADOR DE LA BOMBA (3): Este conmutador s'illuminera lorsque la pompe est allumée. se ilumina cuando la bomba está encendida. ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 17...

  • Page 19: Ext -100H Control Panel

    HEAT LIGHT MODE ( 5 ) : The light will only illuminate when the heater uis heating and will turn off when it reaches operating temperature. ® Page 18 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 20 ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 19...

  • Page 21: Extension Cords - 230V

    Figure 7 one that has a minimum wire size of 12 AWG. Be sure your extension cord is no longer than 50 ft. Do not join two extension cords. ® Page 20 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 22 12 AWG. Assurez-vous que votre prolongación no mide más de 50 rallonge n'excède pas 15 m et n'utilisez pies. No una dos prolongaciones. pas deux rallonges bout à bout. ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 21...

  • Page 23: Machine Operating Instructions

    8. As you make passes, repeat one inch of the area already cleaned. 9. Make more passes until all of the room is cleaned. CAUTION: ALTO U.S. (CLARKE TECHNOLOGY) will not be held liable for damage to the car- pet, or poor results because of the operator's lack of ability.
  • Page 24 8. A medida que realice más pasadas repita una pulgada de ATTENTION: ALTO U.S. (CLARKE la superficie que ya está limpia. 9. Pase la máquina repetidas veces hasta limpiar toda la TECHNOLOGY) ne sera pas habitación.

  • Page 25: Maintenance

    MAINTENANCE WARNING: Maintenance and repairs must be done by authorized personnel only. Keep all fasteners tight. Use only genuine Clarke Tech- nology parts. WARNING: Do not operate this machine un- less it is completely assembled. NOTE: For maintenance of the floor tools read the manual given with the tools.
  • Page 26 Mantenga ajustados todos personnel uniquement. los sujetadores. Utilice solamente piezaoriginales Tenez toutes les fixations de Clarke Technology. bien resserrées. N'utilisez que des pièces Clarke ADVERTENCIA: No opere esta máquina Technology authentiques. hasta que esté totalment ensamblada. ATTENTION: Ne faites pas fonctionner la...

  • Page 27: How To Prevent Damage From Freezing Temperatures

    (see figures 9a & 9b): 1. Empty both tanks. 2. Unlatch tanks from base. Figure 9b 3. Tilt tanks back. 4. Disconnect hoses from tanks. 5. Open up for service. ® Page 26 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 28 3. Faites basculer les réservoirs en arrière. 4. Desconecte las mangueras de los depósitos. 4. Déconnectez les flexibles des réservoirs. 5. Ábralos para realizar las reparaciones. 5. Ouvrez afin de procéder à l'entretien. ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 27...

  • Page 29: How To Check The Commutator And The Carbon Brushes

    4. Lift the upper housing from the lower housing. 5. Disconnect the ground wire. 6. Remove the plastic motor cover. 7. Inspect the commutator. See figure 10. Take the machine to a Clarke Technology authorized repair IRREGULAR AGUJEROS location if you see any of the following conditions:...
  • Page 30 7. Revise el conmutador. Vea la Figura 10. Lleve la 7. Inspectez le commutateur. Voir Figure 10. Amenez máquina a un centro de reparaciones autorizado la machine à un centre de réparation Clarke por Clarke Technology si detecta alguno de los Technology agréé si vous observez l'une des...

  • Page 31: How To Correct Problems In The Machine

    2. There is too much foam. 2. Put defoamer in the solution. Order P/N 398420. 3. The float gasket is dirty or damaged. 3. Clean the gasket. Replace if damaged. ® Page 30 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 32 2. Coloque desespumante en la solución. Solicite el se desborda. producto número 398420. 3. La junta del flotador está sucia o dañada. 3. Limpie la junta. Reemplácela si está dañada. ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 31...
  • Page 33 2. Il y a trop de mousse déborde 2. Ajoutez l'antimousse à la solution. Commande pièce n°398420 3. Le joint du flotteur est sale ou endommagé 3. Nettoyez le joint. Remplacez-le s'il est endommagé ® Page 32 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 34 230V 100, 100H, 300HV ® Extractor Section II Parts and Service Manual (70704A) CLARKE TECHNOLOGY ® - 100, 100H, 300HV 230V Operator's Manual Page 33...

  • Page 35: B -100 Assembly Drawing

    CLARKE TECHNOLOGY -100 230V ® Assembly Drawing 2/03 ® Page 34 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...

  • Page 36: Parts List

    CLARKE TECHNOLOGY -100 230V ® Assembly Drawing Parts List 9/03 Ref # Part No. Description Ref # Part No. Description 59721A Valve-Drain 52674A Latch, Strike 53606A Elbow-45 Degree, Drain 170040 Elbow, ¼ NPT 962929 Screw, 10-32 x 3/8 52675A PVC Reducer...

  • Page 37: B -100H Assembly Drawing

    CLARKE TECHNOLOGY -100H 230V ® Assembly Drawing 2/03 ® Page 36 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...

  • Page 38: Parts List

    CLARKE TECHNOLOGY -100H 230V ® Parts List 9/03 Ref # Part No. Description Ref # Part No. Description 59721A Valve-Drain 962098 Screw, ¼ - 20 x 53606A Elbow-45 Degree, Drain 52840A Quick Disconnect 962929 Screw, 10-32 x 52672A Flange, Exhaust- Flange...

  • Page 39: B -300Hv Assembly Drawing

    CLARKE TECHNOLOGY -300HV 230V ® Assembly Drawing 2/03 ® Page 38 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...

  • Page 40: Parts List

    52847A Heat Repair Kit w/Thermostat & Cutout Asm. Label, Clarke Technology * Items 6, 7 & 104 must be ordered as a set when replacing any original #6 Adapter and: 3 - 85522A Screws, 1 - 962109 Screw, 1 - 920296 Nut.

  • Page 41: B -150 Accessories

    CLARKE TECHNOLOGY -150 Accessories ® Drawing & Parts List 1/03 WARNING : Do not use BEXT 100 accessories on heated units (B 100H & 300HV). ® Injury to operator or bystanders could occur. Damage to the machine could occur. Part No.

  • Page 42: B -100H Accessories

    CLARKE TECHNOLOGY 100H and 300HV Accessories ® Drawing & Parts List 1/04 NOTE: indicates a change has been made since the last publication of this manual. Part No. Description 61395A 12" Wand 30496A Hose Asm., Solution 52544A Valve Body 52996A...

  • Page 43: B -150/100 Connection Diagram

    CLARKE TECHNOLOGY -150 / 100 ® Connection Diagram 230V - 2/03 (Control Panel) BEXT-150C EXTRACTOR SWITCH PLATE 120V *NOTE: Switches sit upside down in switch plate. WHITE 10/03/01 ® Page 42 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...

  • Page 44: B -150/100 Wiring Diagram

    CLARKE TECHNOLOGY -150 / 100 ® Wiring Diagram 230V 1/03 BEXT-150C EXTRACTOR WIRING DIAGRAM 120V BLACK CORD 1 WHITE GROUND ORANGE VAC 1 VAC 2 ORANGE WHITE BLUE PUMP ® CLARKE TECHNOLOGY - 100, 100H, 300HV 230V Operator's Manual Page 43...
  • Page 45 CLARKE TECHNOLOGY -150H / 100H ® Connection Diagram 230V - 2/03 (Control Panel) BEXT-150H EXTRACTOR SWITCH PLATE 120V *NOTE: Switches sit upside down in switch plate. BLACK 16 GA. WHITE 16 GA. 16 GA. “LOCATOR” “MODE” 14 GA. 10/10/01 ®...
  • Page 46 CLARKE TECHNOLOGY 150H / 100H ® Wiring Diagram 230V 2/03 BEXT-150H EXTRACTOR WIRING DIAGRAM 120V BLACK CORD 1 WHITE GROUND ORANGE VAC 1 VAC 2 ORANGE WHITE BLUE PUMP DUAL CORD BLACK SENSOR BYPASS SWITCH CIRCUIT BOARD MODE LIGHT BLACK...
  • Page 47 CLARKE TECHNOLOGY -300HV ® Wiring Diagram 230V BEXT-300HV EXTRACTOR SWITCH PLATE 120V *NOTE: Switches sit upside down in switch plate. BLACK 16 GA. WHITE 16 GA. 14 GA. “LOCATOR” “MODE” 16 GA. 10/10/01 ® Page 46 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 48 CLARKE TECHNOLOGY -300HV ® Wiring Diagram 230V 1/03 BEXT-300HV EXTRACTOR WIRING DIAGRAM 120 V WHITE WISCH CORD 1 BLACK GROUND ORANGE WHITE SOLENOID BLACK WHITE PUMP DUAL CORD WHITE SENSOR HEAT SWITCH CIRCUIT BOARD MODE LIGHT WHITE BLACK LOCATOR LIGHT...
  • Page 49 NOTES ® Page 48 CLARKE TECHNOLOGY -100, 100H, 300HV 230V Operator's Manual...
  • Page 50 ALTO U.S. Inc., Marietta, Georgia 30066 Postbus 65 1455 Canton Road 3370 AB Hardinxveld-Giessendam (770) 973-5225 The Netherlands +31 184 677 200 CLARKE TECHNOLOGY AMERICAN SANDERS TECHNOLOGY ALTO Sverige AB, Molndal (Sweden) A.L. COOK TECHNOLOGY Aminogatan 18 SIMPSON TECHNOLOGY Box 4029...
  • Page 51 Clarke Technology will repair the product and/or replace any defective parts without charge within a reasonable time after receipt of the product. Clarke Technology's liability under this warranty is limited to repair of the product and/or replacement of parts and is given to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.

This manual is also suitable for:

Bext-100hBext-300hv

Table of Contents