Timer Recording; Timer Programming - JVC HR-J239EE Instructions Manual

18
EN
Timer
Programming
Remember, the clock must be set before you can
programme the timer ( pg. 9).
AUTO SP/LP indicator
1
NUMBER
4
7
CANCEL
SP/LP/EP
2 2
5/8
q
PROG.
2 3
5 6
WEEKLY
8 9
TIMER
0
OK

TIMER RECORDING

Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
Select the appropriate colour system by pressing the
COLOUR SYSTEM button.(
ACCESS MODE SELECT
SCREEN
1
Press PROG.
ACCESS TIMER PROGRAM-
MING SCREEN
2
Press TV PROG.5/∞ to
place the pointer next to
"TIMER PROGRAM-
MING", then press OK on
the remote control.
ENTER PROGRAMME
START TIME
3
Press NUMBER key "1(5)"
or "4(∞)" to enter the time
you want recording to
start.
Press and hold either
button to delay or
advance the time by 30
minutes.
If the Programme is already used, press PROG. until a
vacant Programming screen appears.
ENTER PROGRAMME STOP
TIME
4
Press NUMBER key "2(5)"
or "5(∞)" to enter the time
you want recording to
stop.
Press and hold either
button to delay or
advance the time by 30
minutes.
ENTER PROGRAMME DATE
5
Press NUMBER key "3(5)" or "6(∞)" to enter the date.
pg. 22)

TIMER PROGRAMMING

CLOCK SET
[TV PROG5 ∞ ] =
[CANCEL] :EXIT
– P1–
START STOP
=
21:00 – –:– –
SP
DATE TV PROG.
25.12 – –
[1–6] [TV PROG 5 ∞]
[PROG./CLOCK] :NEXT
– P1–
START STOP
=
21:00 22:00
SP
DATE TV PROG.
25.12 – –
[1–6] [TV PROG5 ∞ ]
[PROG./CLOCK] :NEXT