Tuner Set - JVC HR-J239EE Instructions Manual

6
EN

Tuner Set

Turn on the TV and select the VIDEO channel (or AV mode).
1
4
7
2 2
5/8
q
OPERATE
2 3
5 6
8 9
0
TV PROG.
OK
INITIAL SETTINGS (cont.)
Your recorder needs to memorise all necessary stations in
channel positions in order to record TV programmes. Once
stored, you can call them up with the TV PROG. buttons
without going through any vacant channels.
TURN ON THE RECORDER
1
Press OPERATE.
ACCESS CHANNEL SET
MODE SELECT SCREEN
2
Press and hold CH SET for more than 2 seconds. The
Channel Set Mode Select screen appears.
SELECT MODE
3
Press TV PROG.5/∞ to
place the pointer next to
"SEARCH/STORE", then
press OK. The Band Select
screen appears.
SELECT BAND
4
Press TV PROG.5/∞ to place the pointer next to the
band of your choice, then press OK to initiate Auto
Channel Search.
BAND SELECT
VHF L
VHF H
UHF
[TV PROG5 ∞ ] =
[CH SET] :EXIT
SET DESIRED CHANNEL
5
The following screen
appears when a station is
detected. To store the
detected station, place the
pointer next to "STORE" by
pressing TV PROG.5/∞,
then press OK.
If you don't want to store
the station, press TV
PROG.5/∞ to place the pointer next to "CONTINUE",
then press OK. Auto Channel Search will start resume.
The blueback screen and the TV picture currently
being broadcast appear alternately for 8 seconds
each.
SEARCH/STORE
DELETE
FINE TUNING
[TV PROG 5 ∞] =
[CANCEL] :EXIT
AUTO SEARCH PROCEEDING
PLEASE WAIT
VHF L 00
[CH SET] :EXIT
STORE
CONTINUE
[TV PROG5 ∞ ] =
[CH SET] :EXIT