Table of Contents
Advertisement
12
EN
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTES:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Turn on the TV and select the VIDEO channel (or AV mode).
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
If you have, for example, 3 programmes and wish to
watch the first of the 3 programmes, press REVIEW
three times. The recorder searches and begins playback
automatically. You can access a programme as far as 9
index codes away from the current tape position.
NOTE:
Instant ReView is not possible while the recorder is in the Timer
mode.
Repeat Playback
Your video recorder can automatically play back the whole tape
20 times repeatedly.
START PLAYBACK
1
Press PLAY.
ACTIVATE REPEAT
PLAYBACK
2
Press PLAY and hold for over 5 seconds, then release.
"PLAY" on the display panel blinks slowly.
The tape plays 20 times automatically, and then
stops.
STOP PLAYBACK
3
Press STOP at any time to stop playback.
NOTE:
Pressing PLAY, REW , FF or PAUSE also stops Repeat Playback.
PLAYBACK (cont.)
Scene Finder
This function helps you check contents of unlabeled recorded
tapes at the touch of a single button.
Search
Search
FF
REW FF
5 seconds
10 minutes
5 seconds
on counter
NOTE:
Scene Finder cannot be used when the recorder is in the Record
mode.
ACTIVATE SCENE FINDER
1
Press SCENE FINDER. The recorder starts forward high-
speed search for 5 seconds and then fast-forwards 10
minutes on the counter. This cycle is repeated until the
end of the tape is reached.
To start Scene Finder in the reverse direction, press
SCENE FINDER and then press the REW button
within 2 seconds. This cycle is repeated until the
beginning of the tape.
During Scene Finder, "PLAY" appears blinking on the
display panel. During fast forward or rewind, "
or "
" appears on screen.
STOP SCENE FINDER
2
Press STOP.
NOTES:
During Scene Finder high-speed search, you can also hear the
tape sound. During fast forward or rewind, you hear the
current TV sound instead.
Scene Finder does not function during Index Search.
Tape Position Indicator
The tape position indicator appears
on screen when, from the Stop
mode, you press FF, REW or
perform an Index Search. The
position of "5" in relation to "0"
(beginning) or "+" (end) shows you
where you are on the tape.
"O.S.D." (
pg. 5) must be set to
"ON", or the indicator will not
appear.
NOTE:
Depending on the type of tape used, there may be times when
the indication is not correct.
Search
REW FF
REW
10 minutes
5 seconds
on counter
"
3
+
+
+
0
1:23:45
Advertisement
Table of Contents
