Rear View; Display Panel - JVC HR-J235EK Instructions Manual

REAR VIEW

1
1 Mains Power Cord supplies power to recorder.
2 AV1 IN/OUT SCART Connector enables AV connec-
tion to TV or second recorder; input recordable when
"AU 1" selected. pg. 4
3 AV2 IN Connector enables connection of satellite
receiver or second recorder; input recordable when
"AU 2" selected. pg. 6
4 ANT. IN Connector enables connection of aerial.

DISPLAY PANEL

1
I T R
9 0
1 and 2 Symbolic Mode Indicators
PLAY:
FF:
REW:
FF VARIABLE
SHUTTLE SEARCH:
*
REW VARIABLE
SHUTTLE SEARCH:
*
* The indicator will blink during turbo search.
3 "DAILY" Program Mark lights when recorder has been
programmed to record daily serial.
4 "WEEKLY" Program Mark lights when recorder has
been programmed to record weekly serial.
5 Start Time/Stop Time Indicator separates Start Time
and Stop Time of timer recording on Display Panel.
pg. 27
6 Tape Remaining Time Indicator displays time remaining
on tape when certain buttons are pressed.
2
RF OUT
ON–TEST–OFF
5
pg. 4
pg. 4
2 3 4 5
D W
SP
LP
D
EP M
! @ #
REVERSE PLAY:
STILL:
FORWARD SLOW:
STILL:
REVERSE SLOW:
RECORD:
RECORD PAUSE:
pg. 27
pg. 27
pg. 17
3 4
ANT. IN
AV2 IN
32
40
RF OUT
AV1 IN/OUT
6
5 RF OUT Switch enables operation via RF connection
or AV connection; activates test pattern when tuning
TV receiver for video preset.
6 RF OUT Connector enables connection to aerial
terminal of TV receiver.
7 RF Output Channel Adjustment Screw enables
adjustment of output channel if UHF channel 36 is
used in your area. pg. 5
6 7
REMAIN
$
7 PDC Indicator lights when PDC has been engaged
for timer recording.
8 B.E.S.T. Picture System Display lights from bottom to
top while B.E.S.T. is active.
9 "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected or power
turned off.
0 Instant Timer Recording Indicator lights when ITR
initiated; remains lit until ITR finishes.
! Tape Speed Indicators display mode of recording; light
during Record or Play mode.
@ "Timer" Indicator lights when TIMER has been
pressed to engage Timer mode.
# Counter shows time elapsed since playback or
recording began.
REMAIN displays time remaining from current tape
position to end of tape.
Clock Display shows current time.
* Counter, REMAIN and Clock Display appear
alternately when DISPLAY is pressed.
$ Channel Display shows station name being received
and its preset position.
Mode shows external input mode selected.
45
7
pg. 5
pg. 4
8
pg. 30
pg. 20
pg. 23
pg. 19
pg. 27
pg. 9