Download  Print this page

Troubleshooting; Tape Transport - JVC HR-J235EK Instructions Manual

Jvc video cassette recorder instructions.
Hide thumbs

Advertisement

Table of Contents
40
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily
corrected, and this can save you the trouble of sending your video recorder off for repair.
POWER
SYMPTOM
1. No power is applied to the
recorder.
2. The clock is functioning properly,
but the recorder cannot be
powered.

TAPE TRANSPORT

SYMPTOM
1. The tape does not run during
recording.
2. The tape stops during rewind or
fast-forward.
3. The tape will not rewind or fast-
forward.
PLAYBACK
SYMPTOM
1. The playback picture does not
appear while the tape is running.
2. Noise appears during visual search.
3. Noise appears during normal
playback.
4. Noise appears during slow-motion
playback.
5. Noise appears during still play-
back.
6. The playback picture is blurred or
interrupted while TV broadcasts are
clear.
RECORDING
SYMPTOM
1. Recording cannot be started.
2. TV broadcasts cannot be recorded.
POSSIBLE CAUSE
The mains power cord is discon-
nected.
"‰" is displayed on the display
panel.
POSSIBLE CAUSE
"^" is displayed on the display
panel.
"M" is displayed on the display
panel.
The tape is already fully rewound or
fast-forwarded.
POSSIBLE CAUSE
If you're using the RF OUT connec-
tion . . .
. . . the TV receiver's preset selector
is set to the wrong video preset.
. . . the RF switch has been mistak-
enly set to OFF.
If you're using the AV connection,
the TV receiver is not set to the AV
mode.
This is normal.
The automatic tracking mode is
engaged.
The automatic tracking mode is
engaged.
The video heads may be dirty.
POSSIBLE CAUSE
There is no cassette loaded, or the
cassette loaded has had its Record
Safety tab removed.
"AU" has been selected as the input
mode.

TROUBLESHOOTING

CORRECTIVE ACTION
Connect the mains power cord.
Press the TIMER button to turn the
"‰" indicator off.
CORRECTIVE ACTION
Press PLAY to turn the "^" indicator
off.
Press C.MEMORY to deactivate the
Counter Memory function and turn
the "M" indicator off.
Check the cassette.
CORRECTIVE ACTION
If you are using the RF OUT connec-
tion . . .
. . . set the TV receiver to the RF
converter preset (UHF 36). (
. . . turn the RF switch back to ON.
(
pg. 5)
If you are using the AV connection,
set the TV to its AV mode.
Try manual tracking. (
pg. 14)
Try manual tracking. (
pg. 14)
Press PAUSE a few times to remove
the noise bars from the screen.
Consult your JVC dealer.
CORRECTIVE ACTION
Insert a cassette, or using adhesive
tape, reseal the slot where the tab
was removed.
Set to the desired preset.
CONTINUED ON NEXT PAGE.
pg. 5)

Advertisement

Table of Contents

   Related Manuals for JVC HR-J235EK

Comments to this Manuals

Symbols: 0
Latest comments: