Tune The TV To Your Video
RF OUT switch
The video recorder sends picture and sound signals via the RF
connecting cable to your TV on UHF channel 36.
TURN ON THE RECORDER
SELECT OUTPUT MODE
Set the RF OUT switch on the back of the recorder to
TV Aerial Cable
Back of Recorder
SET TV PRESET
Set your TV to the video preset (UHF channel 36). Two
white bars appear on screen vertically.
Tune the TV until the bars are as clear as they can be.
Your TV should be set to the preset designated for use
with a video recorder, or to a spare preset if there is
not a specified video preset on your TV.
RESET OUTPUT MODE
Return the RF OUT switch to ON.
If some interference noise is continually seen on the screen,
consult your JVC dealer.
RF output channel