Clock Set - JVC HR-DVS3EK Instructions Manual

80

Clock Set

Turn on the TV and select the AV mode.
1
2
1
4
7
1
2
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set "ON" or "OFF" at the Clock
Set screen (the default setting is "OFF"). Press OK until the
Just Clock setting begins blinking, then press
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
recorder's built-in clock may be reduced, which could
adversely effect timer recording. We recommend you to keep
Just Clock on. In cases where the clock setting data from a
PDC signal is incorrect, however, you are advised to keep
Just Clock set to "OFF".
2 3
5 6
3
8 9
4
4
0
3
to change
rt
SUBSIDIARY SETTINGS (cont.)
IMPORTANT
If you performed Auto Set Up (
( pg. 14) or Auto Channel Set (
having set the clock previously, the recorder's built-in clock is
also set automatically.
Perform the following steps only if —
—Auto Clock Set has not been performed correctly by Auto
Set Up, Preset Download or Auto Channel Set.
OR
—the recorder's memory backup has expired.
OR
—you want to change Just Clock setting (
the left column).
A
Turn on the recorder.
Press .
1
B
Access the Main Menu screen.
Press MENU.
C
Access the Initial Set screen.
Press to move the highlight bar (pointer) to "INITIAL
rt
SET", then press OK or
e
D
Access the Clock Set screen.
Press to move the highlight bar (pointer) to "CLOCK
rt
SET", then press OK or
e
pg. 13), Preset Download
pg. 72), without ever
"Just Clock" in
.
. The Clock Set screen appears.