Index Search; Skip Search; Instant Review - JVC HR-DVS3EK Instructions Manual

High-Speed (Turbo) Search
During playback, turn the JOG dial quickly to the left or
right.
OR
During playback or still, press
speed search, or for reverse high-speed search.
3
NOTE:
For short searches, press and hold
seconds during playback or still picture. When released, normal
playback resumes.
Variable Speed Search
During playback, turn the JOG dial to the right for
forward variable-speed search, or to the left for reverse
variable-speed search.
OR
During playback, press
w
The more times you press, the faster the playback picture
moves.
To decrease speed, press the button for the opposite direction.
To resume normal playback, press

Skip Search

During playback, press 30 SEC 1 to 4 times to skip over
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
To resume normal playback during a Skip Search,
press .
4
for forward high-
5
or for over 2
5 3
or .
e
.
4

Index Search

Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
Press or ( or
w e 2 6
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
twice.
To locate the beginning of D from the current position, press
once.
Current position
When the specified index code is located, playback begins
automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Activate Instant ReView.
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
"REVIEW" and "3" appear and blink. To watch the first of the 3
programmes, press REVIEW three times. The recorder searches
and begins playback automatically. You can access a
programme as far as 9 index codes away from the current tape
position.
). " 1" or " 1" is
2 6
or repeatedly
w e
Index number
23
w
e