Normal Dubbing (From Vhs To Dv) - JVC HR-DVS3EK Instructions Manual

Normal Dubbing
(from VHS to DV)
1
2
1
4
7
1
2
NOTES:
If you set the dubbing direction incorrectly, you could erase an
important recording that you wanted to copy. It is
recommended to conduct a test with unimportant cassettes
first.
There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
To cancel the dubbing mode, press PR +/– so that the dubbing
direction indicator ( VHS) goes off.
Before you start dubbing, set "SOUND MODE" to the
appropriate mode. ( pg. 71)
1 3 2
2 3
5 6
3
8 9
4
4
0
3
You can dub selected scenes on a tape, starting and stopping
wherever you wish.
A
Load cassettes.
For the VHS deck
Insert a VHS (or S-VHS) cassette with the record safety
tab removed.
For the DV deck
Insert a Mini DV cassette with the erase protection switch
set to "REC".
B
Select the dubbing direction.
Press .
The dubbing direction indicator (
C
Set the tape speed.
Press DV, then press SP/LP (
"DV VHS" appears on the TV screen if "O.S.D." is set to
}
"ON". ( pg. 67)
D
Locate the start point on the VHS deck.
A Press VHS.
B Press
to start playback.
4
C Press
to pause playback a little before the start
9
point.
E
Prepare the DV deck for dubbing.
A Press DV.
B Press and hold
and press
9
enters the Record Pause mode.
VHS playback indicator and DV recording indicator light.
F
Start dubbing.
Press START.
G
Pause dubbing.
Press START.
The DV deck enters the Recording Pause mode, then the VHS
deck enters the Dubbing Pause mode.
H
End dubbing.
Press to stop recording on the DV deck. Then press
8
VHS and press to stop playback on the VHS deck.
8
47
VHS) lights.
).
p
so that the DV deck
7