Toshiba 1000 Series User Manual page 44

Status of the UPS, measurements, and alarms are all indicated on the LCD screen.
Normal Display
The UPS status is shown in the normal display mode. The UPS Meters display and
the Setting display may be accessed by pressing this button.
UPS Meters Display
Listed below are the parameters available for viewing from the UPS meters display.
Press this button to scroll through the parameters.
LCD Message
O/P VOLT= xxx.xV
O/P FREQ= xx.x Hz
I/P VOL T= xxx.xV
I/P FREQ= xx.x Hz
BAT VOLT= xx.xV
O/P LOAD%= xx%
O/P W= xW
O/P VA= xVA
O/P CURR= xA
BACKUP TIME= xx min Shows Estimated Backup Time in Minutes
BAT CHARG= xx%
TEMPERATURE= xxC
BAT PACK NUM= x
RATING = xxxxVA
CPU VERSION xx.x
Figure 3 Control panel
Description
Shows Output AC Voltage
Shows Output Frequency
Shows Input AC Voltage
Shows Input Frequency
Shows Battery Voltage
Shows Load % of Max Load
Shows Output Watts
Shows Output VA
Shows Output Current
Shows Approximate Percentage of Battery Capacity
Shows Approximate Ambient Temperature
Shows External Battery Pack Number
Shows UPS Rating
Shows CPU Version
22