Recording - JVC HR-E249E Instructions Manual

18
EN
Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).
1
4
NUMBER
RECORD
5/8
6
q 1 ¡
2
2 3
5 6
7 8 9
0
4
TV PROG.
PLAY
PAUSE
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG. +/– or the NUMBER keys to select the
channel you wish to record.
The TV PROG. dial can also be used to select a channel.
START RECORDING
3
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
B.E.S.T. takes place at the beginning of the first
recording after inserting the cassette (
PAUSE/RESUME
RECORDING
4
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
5
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
RECORDING
pg. 20).
Record safety tab