Index Search; Instant Review; Tape Position Indicator - JVC HR-E249E Instructions Manual

16
EN
REVIEW
C.RESET
REW
SCENE FINDER
PUSH JOG

Tape Position Indicator

The tape position indicator
appears on screen when, from
the Stop mode, you press FF,
REW or perform an Index
Search. The position of "5" in
relation to "0" (beginning) or
"+" (end) shows you where you
are on the tape.
"O.S.D." ( pg. 19) must be
set to "ON", or the indicator
will not appear.
NOTE:
Depending on the type of tape used, there may be times when
the indication is not correct.
5/8
6
q 1 ¡
2
1 2 3
4 5 6
7 8 9
0
4
FF
STOP
3
+
0
REMAIN 2:35
Beginning

Index Search

Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
Press PUSH JOG
"£ 1" is displayed on screen and search begins in
the corresponding direction.

Instant ReView

Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many programmes
have been recorded. If you have, for example, 3
programmes, "REVIEW" and "3" appear and blink. To
watch the first of the 3 programmes, press REVIEW three
times. The recorder searches and begins playback
+ +
automatically. You can access a programme as far as 9
1:23:45
index codes away from the current tape position.
NOTE:
End
Instant ReView is not possible while the recorder is in the Timer
mode.
PLAYBACK (cont.)
or (™ or £). "™ 1" or
To access index codes 2 through 9, press PUSH JOG
or repeatedly until the correct index number is
displayed.
Ex.: To locate the beginning of B from the current
position, press PUSH JOG
To locate the beginning of D from the current
position, press PUSH JOG
Current position
A B C
–2 –1
When the specified index code is located, playback
begins automatically.
£ 2
twice.
once.
D E F
1 2 3
Index number