Ariens Zoom XL 48 Owner's/Operator's Manual page 15

Timer (TMR1): measures the time spent on
individual jobs.
Press and hold the toggle button to reset the
timer to zero. TMR1 will then start measuring
engine run time until it is reset to zero again.
Service Alert (Chg Oil, Chg H Oil & Filter,
SVC Airfilter): reminds operators of the
maintenance interval for changing the engine
oil, changing the hydraulic oil and filter and
servicing the air filter.
The alert starts counting down two hours
before the maintenance is due. The meter
flashes the word, "Now," when it reaches the
maintenance time.
Press and hold the toggle button to reset the
maintenance clock to zero after performing
the service.
NOTICE: The hour meter is preprogrammed
for the initial oil change at 25 hours and for
100 hours thereafter. The hour meter is
programmed for the initial hydraulic oil and
filter change at 75 hours and for 400 hours
thereafter.
Display
Steering Levers
• Reverse (1) – Pull both steering levers
backward.
• Forward (2) – Push both steering
levers forward.
• Left (3) – Pull left steering lever back
or push right steering lever forward or
a combination of both.
• Right (4) – Pull right steering lever
back or push left steering lever forward
or a combination of both.
Toggle Button
EN - 15
1
3
NOTICE: To stop, return both steering levers
to neutral.
NOTICE: The steering levers must be in the
neutral position to start the engine.
NOTICE: The parking brake must be
disengaged prior to moving the steering
levers from the neutral position.
Mower Lift Pedal
Figure 6
Raises and lowers the deck.
1
1. Height of Cut Lever
2. Mower Lift Pedal
3. Adjustment Bracket
Figure 6
NOTICE: The height of cut lever is used to
set the height of the mower deck. See
Specifications on page 32 for cutting height
dimensions.
Press mower lift pedal and place height of cut
lever to desired adjustment notch.
NOTICE: Adjusting the seat further forward
will help increase the leverage in lifting the
mower deck (see Adjusting Seat on page 16).
2
3
2
4