General Features - Epson TM-T90 Specification

Confidential
1) This specification applies to the following products in the TM-T90 series printer:
TM-T90
TM-T90 P
* This specification describes only the outline of the general functions and the model-dependent
functions of the commands. For detailed specifications and usage of the commands, please refer
to the ESC/POS APG (Application Programming Guide) that is separately issued.
The following models are available for each product above.
1) Alphanumeric (ANK) model (dot density: 0.141 mm/dot)
2) Multilingual model (dot density: 0.141 mm/dot)
3) Japanese model (dot density: 0.125 mm/dot)
NOTE: The multilingual character model supports printing with one of the following characters:
➀ Simplified Chinese
➁ Traditional Chinese
➂ Thai
➃ Korean
2) Features
The TM-T90 series printer has the following features:
<Printing>
• High-speed printing (170 mm/s {6.69"/s} maximum), which enables issuing of batch receipts.
• Logos and graphics are also printed with a 170 mm/s maximum high-speed printing (when the
parallel or USB interface is used.)
• Highlight printing is possible on the two-color paper (Print speed: 100 mm/s {3.94"/s}
maximum for ANK/multilingual model or 90 mm/s {3.54"/s} for Japanese model).
(ANK = alphanumeric)
<Printer handling>
• Placing the printer is easy, because it can be placed horizontally on a table or vertically by
hanging it on a wall.
• Easy drop-in paper loading.
• Cable connectors are housed in the bottom of the printer.
<Software>
• Command protocol is based on the ESC/POS
• OPOS ADK and Windows
• In addition to supporting several kinds of bar code printing, two-dimensional code (PDF417)
printing is possible.
• Various layouts are possible by using page mode.

GENERAL FEATURES

(with serial interface)
(with parallel interface)
®
printer drivers are available.
TITLE
TM-T90
Specification
(STANDARD)
®
Proprietary Command System.
SHEET NO.
REVISION
NEXT
F
SHEET
III II