Esc A N; Esc C 3 N - Epson TM-T90 Specification

Confidential

ESC a n

[Name] Select justification
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Range]
[Default] n = 0
[Description] • In standard mode, aligns all the data in one line to the position specified by n as follows:
n
0, 48
1, 49
2, 50

ESC c 3 n

[Name] Select paper sensor(s) to output paper-end signals
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
[Default] n = 0 (when the memory switch 8-7 is Off.)
n = 15 (when the memory switch 8-7 is On.)
[Description] • Selects the paper sensor(s) to output paper end signals when a paper end is detected.
Bit
0
1
2
3
4 ∼ 7
• This commands is available only with a parallel interface and is ignored with a serial interface.
[Note]
EPSON
ESC a n
1B 61 n
27 97 n
Justification
Left justification
Centering
Right justification
ESC c 3
1B 63 33
27 99 51
Off/On Hex Decimal
Off 00 0
On 01 1
Off 00 0
On 02 2
Off 00 0
On 04 4
Off 00 0
On 08 8
-- -- --
TITLE
TM-T90
Specification
(STANDARD)
n
n
n
Function
Roll paper near-end sensor disabled.
Roll paper near-end sensor enabled.
Roll paper near-end sensor disabled.
Roll paper near-end sensor enabled.
Roll paper end sensor disabled.
Roll paper end sensor enabled.
Roll paper end sensor disabled.
Roll paper end sensor enabled.
Reserved.
SHEET
REVISION
NO.
NEXT SHEET
F
95 94