Updating Your Time Zone - Navig8r Navwatch-S10 User Manual

Note: Through-out making your adjustments in the menu settings screens, this device
will default back to the main time screen if no buttons are pressed for 60 seconds.

UPDATING YOUR TIME ZONE

Note: This unit has 2 time zone settings. The main time zone is Zone 1 (referred to here
on as T1). T1 is always symbolised by an abbreviated day name eg. SUN, MON etc. Time
zone 2 (referred to here on as T2) is symbolised only as T2.
Note: Once you have set your time zones and pressed the mode button to return to the
main time screen, use the mode button to toggle between the times in T1 and in T2.
USER MANUAL
1.
until the Day (abbreviation) starts flashing
between T1 (Time Zone 1 abbreviation)
and UTC. (or a + / - number. Eg. +3 or -10)
2.
current time zone UTC (Coordinated
Universal Time) number. Refer to the UTC
time zone list later in the manual if
required. Use the LIGHT and REC buttons
to adjust this number to your time zone.
Hint: Press both LIGHT and REC buttons
together for rapid advance.
3.
setting, press the MODE button again to
toggle to the T2 setting and adjust as
required (optional). Press the MODE
button again to return to the main time
screen.
NAVWATCH-S10
Press and hold the MODE button
At this stage you need to input your
Once you have adjusted your T1
7 | P a g e