Trouble Shooting / Q & A - Navig8r Navwatch-S10 User Manual

USER MANUAL
NAVWATCH-S10
TROUBLE SHOOTING / Q & A
Q. How do I know when the battery is ready for a charge?
A. The battery icon on the screen has no bars left inside it. If you try to turn on the GPS
feature and the word LOW appears, it means there is not enough available power. The
feature will not be able to be turned on.
Q. How long does it take to charge?
A. It takes 4 hours to fully from when the low battery indicators start flashing. The
portable battery charger can fully recharge the watch up to 2 times.
Q. How long will a charge last me?
A. In time mode only, that watch can last for up to 90 days. In continuous GPS mode it
can last up to 7 hours.
Q. Is it better to keep the battery voltage topped up even if I am not using it?
A. Yes. If any battery in general is left for long periods of time and allowed to discharge,
the expected life span does reduce. It is also recommended that to ensure maximum
battery life that the battery is not continuously run flat before charging.
Q. Is there any specific care instructions for the charger?
A. It is advisable to keep the contacts of your charger clean and dry. Avoid touching the
contacts with your finger and do not use any sharp metal objects such as needles or to
clean the contacts. Only use a dry lint free cloth. The standard operating temperature
for the charger is between 0°C and 45°C.
Q. My charger is not charging. What can I do to check that it works?
A. Try turning the charging on and off to see if the power button is sticky.
For further product information and instruction please visit our product web page at
www.laserco.net support@laserco.com.au
or email
Please note: As continual improvements are made to this product, slight operational
differences may occur. For the most up-to-date user manual, please visit our web site.
32 | P a g e