Charging Your Watch - Navig8r Navwatch-S10 User Manual

CHARGING YOUR WATCH

USER MANUAL
3. Turn the power switch on.
4. The yellow indicator lamp will appear
when the battery requires charging.
5. When charging is completed, the
indicator lamp will change to green.
6. While removing the watch, be mindful
to hold the cradle firmly while pressing the
left-side release button.
Note: Check the cradle has enough power
for another re-charge by switching the
power button on while not connected to
USB power and without the watch in place.
If the indicator lamp is green, there is
enough power for another charge. (used
when optionally battery is fitted)
NAVWATCH-S10
When a recharge is required:
1. Align the cradle with the
power switch facing towards you.
2. Carefully press the watch down
and slide the locking arm into
place until it clicks.
6 | P a g e