Navigation; Saving Favourite Position Locations (Pl) To Memory - Manually; Navigating To A Saved Position Location (Pl) - Navig8r Navwatch-S10 User Manual

Note: If the hourly chime is turned on, a picture of a CLOCK
FACE will appear at the top of the screen.

NAVIGATION

Saving favourite position locations (PL) to memory - manually

1. From the main timer screen, press the FUNCTION
button twice. The letters PL--1 will then start flashing
on your screen.
2. Use the LIGHT (scroll up) or the REC (scroll down)
buttons to select between 9 position locations then
press the FUNCTION to begin GPS sync to this
memory location. Once completed the co-ordinates
and will be flashed on the screen. The date and
time data will also be recorded.
Note: PL data can further be viewed and edited
using the supplied software.

Navigating to a saved position location (PL)

1. From the main timer screen, press the FUNCTION button twice. The letters PL--1
will then start flashing on your screen.
2. Use the LIGHT (scroll up) or the REC (scroll down) buttons to select between any
of the previous (up to) 9 position locations.
Note: Each time a PL location is saved, date and time is also recorded and displayed on
each memory entry. You can also use the FUNCTION button to toggle between the co-
ordinate details.
3. Once a memory location has been selected, and
while the co-ordinates are displayed on the screen,
use the LIGHT (scroll up) or the REC (scroll down)
buttons to select between the functions DEL
(Delete) and GOTO (Go to).
USER MANUAL
NAVWATCH-S10
13 | P a g e