Designation-Free Based Tracking - Sports Mode - Navig8r Navwatch-S10 User Manual

Designation-free based tracking – Sports Mode
1. From the main time screen, press the FUNCTION button ONCE. The letters NAV
will begin to flash.
2. Use the LIGHT and REC buttons to scroll through the screens; NAV, CHM, MEM,
ALM, SPT and ARC. The two unique screens in this menu view are SPT and ARC.
Press the FUNCTION button to select a feature (in this case we will discuss SPT
as the other features have been discussed previously).
Note: The other features are shared from the main menu as previously described and
are present here purely for convenience. i.e. There are not 2
separate alarm system menus.
3. SPT: Once the GPS signal has been acquired, TR-XX
(where XX are numbers generated by default from
01 to 99) and START will appear. Press the
FUNCTION button to begin exercising / tracking.
4. You can use the LIGHT and REC buttons to scroll through information such as
your current speed, distance travelled altitude and your current GPS coordinates.
Note: If there is a signal interruption during this mode, the letters LOSS will appear on
the screen and an alarm will sound for 5 seconds. Pressing the buttons LIGHT, FUNCTION
or REC will stop the alarm sounding. Exit the navigation screen at any time by pressing
the MODE button. If no signal has been reached within 5 minutes, the navigation screen
will close and revert back to the main time screen.
4. Press the MODE button to stop tracking in sports mode. If no other buttons are
pressed, the screen will revert back to the main time screen after 3 minutes.
USER MANUAL
NAVWATCH-S10
15 | P a g e