Navig8r Navwatch-S10 User Manual page 14

3.1 DEL: With the letters DEL on the screen, press the FUNCTION button to
advance to a confirmation page with the flashing letters YES. Press the
function button again to delete this memory setting.
3.2 GOTO: With the letters GOTO on the screen,
press the FUNCTION button to confirm. The
title will then change to GET (get GPS data).
The unit will then compare the stored co-
ordinates to that of your current location.
3.2.1 Once the co-ordinates have been
calculated, the navigation screen will
be displayed. This screen displays a) the direction of the designation
and the distance between the two points, b) your current speed
(when you start moving), c) if signal is lost, and d) when your
destination is reached.
a
Note: If there is a signal interruption during this mode, the letters LOSS will appear on
the screen and an alarm will sound for 5 seconds. Pressing the buttons LIGHT, FUNCTION
or REC will stop the alarm sounding. Exit the navigation screen at any time by pressing
the MODE button. If no signal has been reached within 5 minutes, the navigation screen
will close and revert back to the main time screen.
USER MANUAL
b
NAVWATCH-S10
c
14 | P a g e
d