Table of Contents
Advertisement
Alarm Types
I.
Flow Chart (pg 4 & 5)
II.
Quick Reference Guide (pg 6 & 7)
1.
Low Power Cartridge or warm Power Cartridge (pg 9)
ECLIPSE is: Beeping has a YELLOW light flashing and the unit IS running.
2.
Low Oxygen Purity (Between 85% & 70%) (pg 9)
ECLIPSE has: a YELLOW light flashing and the unit IS running. (NO Alarms).
3.
Low Oxygen Purity Below 70%) (pg 10)
ECLIPSE is: Beeping with a RED light flashing and the unit IS running.
4.
Flow Rate Error / Blocked Flow (pg 11)
ECLIPSE is: BEEPING has a YELLOW BLINKING LED and the unit IS
5.
No Inspiration Detected (In Pulse Mode Only) (pg 12)
ECLIPSE has: GREEN & YELLOW STEADY LED and the unit IS running.
6.
Loss of External Power or Hot Power Cartridge. (pg 13)
Eclipse has: a CONTINUOUS ALARM, a RED FLASHING LIGHT and the
Eclipse is NOT Running.
7.
System Malfunction (pg 14)
Eclipse has: a RED LIGHT FLASHING and ALARMING CONTINUOUSLY, and
the unit is NOT Running.
Troubleshooting Guide
Troubleshooting Guide
11436 Sorrento Valley Road • San Diego, CA 92121 •
running.
www.sequal.com
• 858.202.3100
2
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Eclipse and is the answer not in the manual?
Questions and answers
I have a yellow light continusly on. I **** getting alarm code 8
Yellow light snd alarm sounding every few seconds
The yellow light on a SeQual Eclipse generally indicates a device issue. If an alarm sounds every few seconds along with the yellow light, it may signal a problem requiring service, such as sieve bed replacement. Additionally, specific alarm codes like AC-04 may indicate a malfunction needing customer service assistance.
This answer is automatically generated