Table of Contents
Advertisement
4.
Flow Rate Error / Blocked Flow
Eclipse is:
BEEPING
A.
Ensure that the Oxygen Tubing and Nasal Cannula are not blocked or kinked
B.
If a humidifier bottle is attached make sure it is not clogged? Replace it if necessary
C.
Check to make sure Air Intake Vent (Filter) is not blocked. Replace it with a clean filter if
needed
i.
If flow is still blocked:
Troubleshooting Guide
Troubleshooting Guide
has a
YELLOW BLINKING LED
Exchange out the unit for evaluation and possible repair
11436 Sorrento Valley Road • San Diego, CA 92121 •
and the unit
IS
running
In-Take Vent
Exhaust Vent
www.sequal.com
13
• 858.202.3100
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Eclipse and is the answer not in the manual?
Questions and answers
I have a yellow light continusly on. I **** getting alarm code 8
A continuously yellow light with alarm code 8 on the SeQual Eclipse indicates a "Low O2" condition, meaning the oxygen purity is below 85% but above 70%.
This answer is automatically generated
Yellow light snd alarm sounding every few seconds
The yellow light on a SeQual Eclipse generally indicates a device issue. If an alarm sounds every few seconds along with the yellow light, it may signal a problem requiring service, such as sieve bed replacement. Additionally, specific alarm codes like AC-04 may indicate a malfunction needing customer service assistance.
This answer is automatically generated