Product Overview - Martin Professional Stagebar 54 User Manual

Product overview

Stagebar 54 L Stagebar 54 L
Stagebar 54 S Stagebar 54 S
A
A
A - End cap release screws
B - Cooling fan
C - Data output connector (RJ-45)
Use to relay DMX control data to the next
fixture.
D - Safety attachment eye
Use only this attachment point for secondary
attachment (e.g. safety cable).
E- Power outlet (PowerCon light grey)
Connect a power cable with a light-grey
Neutrik PowerCon connector to lead power to
the next fixture. The total current draw of all
the devices connected to the power outlet of
the first fixture in the chain must not exceed
15 amps peak, 11 amps constant
6
E
D
B
C
F - Quarter-turn mounting points
Use to attach the floorstand/mounting bracket
supplied with the fixture or an omega bracket.
G - Control panel/display
H - Data input connector (RJ-45)
Connect to DMX control data from the
controller or previous fixture.
I- Power inlet (PowerCon blue)
Connect a power cable with a blue Neutrik
PowerCon connector from a 100-240 VAC
nominal 50/60 Hz power source.
J - Primary fuseholder
Replace fuse with one of same type and
rating only.
Figure 1: Connections panel
Stagebar 54 user manual
J
I
F
H
F
G