Martin Professional Stagebar 54 User Manual page 4

• Do not expose the fixture to rain or moisture.
• Refer any service operation not described in this manual to a qualified technician.
P R O T E C T I O N F R O M F I R E
• Do not attempt to bypass thermostatic switches or fuses. Replace defective fuses with ones of the
specified type and rating only.
• Provide a minimum clearance of 0.1 m (4 in.) around fans and air vents.
• Do not modify the fixture or install other than genuine Martin™ parts.
• Do not stick filters, masks or other materials directly onto LEDs.
• Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).
P R O T E C T I O N F R O M I N J U R Y
• Do not hang fixtures from each other. Use one clamp per fixture when suspending.
• When suspending the fixture, ensure that the structure and all hardware used can hold at least 10 times
the weight of all devices suspended from them.
• Use a secondary attachment (such as a safety cable) to secure each fixture. Secondary attachments
must be able to hold at least 10 times the weight of all devices suspended from them and must be
installed as described in this manual.
• Check that all external covers and rigging hardware are securely fastened.
• Block access below the work area and work from a stable platform whenever installing, servicing or
moving the fixture.
• The LED emission presents a hazard to eyesight at a distance of 4 - 40 cm (1.6 - 16 inches) when the eye
is exposed to the beam for longer than 0.25 seconds.
• Do not look at LEDs from a distance of less than 40 cm (1 ft. 4 in.) without suitable protective eyewear.
• Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light output.
Disposing of this product
Martin™ products are supplied in compliance with Directive 2002/96/EC of the European
Parliament and of the Council of the European Union on WEEE (Waste Electrical and Electronic
Equipment), as amended by Directive 2003/108/EC, where applicable.
Help preserve the environment! Ensure that this product is recycled at the end of its life. Your
supplier can give details of local arrangements for the disposal of Martin™ products.