Storing Data Via Rs232; Plu Entry Using Rs-232 Interface - Intelligent QHD Series User's Operation Manual

PLUxx Select PLU from scale memory to be used
T Tare current weight value
T123.456 preset tare value is 123.456
Z Zero the display
P Print using selected format
M+ Store current results into memory and print
MR Recall memory values to scale display
MC Clear memory
U123.456 Store unit weight of 123.456(grams if in kilograms or pounds if
currently in pounds)
S123 Enter sample size of 123 parts. Same as pressing Smpl key.
SL Select local scale to be used
SR Select remote scale to be used
Immediate Printing Commands:
Command
\L
\I
\S
\N
\G
\T
\U
\P
\C
\W
\M
\B

9.2 STORING DATA VIA RS232

To store data the commands are:
SUIDxxxxxx <CR>
SSIDxxxxxx <CR>
SPLUxx,xxxxxxxxxxxx <CR>
When PLU text data is stored the Scale used, current unit weight and current tare value
is also stored to that PLU number.
For the SPLU command the data is: PLU number (2 characters), (Comma) description
(max 12 characters).
If the fields are less than the maximum all characters need not be used.

9.3 PLU ENTRY USING RS-232 INTERFACE

- 20 -
Output from scale
Scale: Local or Remote
ID number same as PUID below
Scale number same as PSID below
Net weight
Gross Weight
Tare weight
Unit weight
Count
Total Count
Total Weight
Number of items stored in memory
A blank line printed
Store user ID data
Store scale ID data
Store text data for PLUxx