Intelligent QHD Series User's Operation Manual page 17

ACTIONS
Press Zero if required.
Note:
Enter or determine the Tare Weight when a container is to be used (see section 6.2 of
this User Manual). If a Tare value is used, the scale will be in the NET mode.
Enter or determine the Unit Weight as described in section 6.3.1 and 6.3.2 of this User
Manual.
The Tare and Unit Weight to be stored can be either taken from a weighing in process
or by manual entry of data.
Please find below an example for setting up "PLU 27" with Description as "M4 Nut"
and Unit weight of "0.015".
For Example: how to store PLU 27. First you need to set the unit weight "0.015"
(press "0",".","0","1","5" keys to input, and then press "U.Wt" key), the "unit weight"
window will show "0.015", and then press "PLU" key  enter 27  press "PST" key 
enter product name (description of the product) "M4 nUt" ("unit weight" windows
display), "brASS" ("count" window display)  press "tare" key to sure, then the PLU 27
is stored in the scale.
ACTIONS
Press PLU
Press 2, 7
Press Pst
Pressing the CE
key when the first
character is flashing
will clear all the
descriptions.
Continue to enter
characters until
description is
complete.
Note:
Hold "0-9" digit keys to input character, the "." key to go back to the previous digit or the
DISPLAYS
Weight Unit weight Count
"00000" " 0"
DISPLAYS
Weight Unit weight
"PLU " " - -"
"PLU " " 27"
"PLU 27" "x x x x x x"
"PLU 27 " " "
"PLU 27 " "M 4 Nut"
REMARKS
" 0" The scale is zeroed.
REMARKS
Count
" " -
" " -
"x x x " The current description
will be shown with the
first character flashing.
The flashing digit can be
changed using the
numeric keypad.
" " -
"Brass " 12 characters in
total spreading over
both the displays (UNIT
WEIGHT and COUNT).
- 13-