Adjusting The Rebound Damping Of The Fork; Handlebar Position - KTM 450 SX-F EU Owner's Manual

TUNING THE CHASSIS

Adjusting the rebound damping of the fork

9.13
Info
The hydraulic rebound damping determines the fork suspension behavior.

Handlebar position

9.14
A 0 0 A
B 0 0 B
Guideline
Compression damping (450 SX‑F EU)
Comfort
Standard
Sport
Compression damping (450 SX‑F USA)
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Remove protection caps
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
B00295-10
Rebound damping (450 SX‑F EU)
Comfort
Standard
Sport
Rebound damping (450 SX‑F USA)
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection covers
On the upper triple clamp, there are 2 holes at a distance of
Hole distance A
The holes on the handlebar support are placed at a distance of
Hole distance B
The handlebar can be mounted in four different positions. In this way, the handlebar
can be mounted in the position that is most comfortable for the rider.
800116-10
14 clicks
12 clicks
10 clicks
14 clicks
12 clicks
10 clicks
.

clockwise all the way.

are located at the bottom end of the fork legs.

14 clicks
12 clicks
10 clicks
14 clicks
12 clicks
10 clicks
.

15 mm (0.59 in)
3.5 mm (0.138 in)
28
to each other.

from the center.
