Installing The Shock Absorber - KTM 450 SX-F EU Owner's Manual

SERVICE WORK ON THE CHASSIS

Installing the shock absorber

10.21
–
Press angle lever
–
Press linkage lever
B00268-10
–
Detach springs
Spring hooks (50305017000)
–
Remove screw
B00409-10
–
Remove screw
–
Turn the shock absorber toward the rear and remove the exhaust manifold.
–
Remove the shock absorber from the top.
B00270-10
x
–
Insert the shock absorber from above.
–
Turn the shock absorber toward the rear and position the exhaust manifold.
–
Position the shock absorber.
–
Mount and tighten screw
Guideline
Screw, top shock absorber
B00272-10
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Attach springs
Spring hooks (50305017000)
B00409-11
–
Position the angle lever and linkage lever.
–
Mount and tighten screw cap
Guideline
Nut, linkage lever to angle lever
–
Mount and tighten screw
Guideline
Screw, bottom shock
absorber
B00408-11
–
Install the main silencer. (
toward the rear.

downward.

.

.

.

.

M10
.

M8
.

.

M14x1.5
.

M10
p. 40)
60 Nm Loctite ® 2701
(44.3 lbf ft)
25 Nm
(18.4 lbf ft)
80 Nm (59 lbf ft)
60 Nm Loctite ® 2701
(44.3 lbf ft)
37