Replacement Of Regulator Ic (Ic2810); Disassembly Of Front Panel - Panasonic SA-VK960GC Service Manual

SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
Step 5 Detach Main P.C.B. at the connectors (CN2810 &
CN5603) on D-Amp. P.C.B and (CN5902) on SMPS P.C.B.
Step 6 Remove Main P.C.B.
10.9. Replacement of Regulator IC
(IC2810)
• • • • Follow (Step 1) to (Step 5) of Item 10.3.
• • • • Follow (Step 1) to (Step 4) of Item 10.4.
• • • • Follow (Step 1) to (Step 6) of Item 10.8.
Step 1 Desolder pins of the regulator IC (IC2810) at the
reverse side of Main P.C.B.
Step 2 Remove 1 screw.
Step 3 Remove the regulator IC (IC2810) from the heatsink.
Caution: Handle the heatsink with caution due to its high
temperature after prolonged use. Touching it may lead to
injuries.
Note : Refer to the diagram of Main P.C.B. (Section 10.8.) for
location of the part.

10.10. Disassembly of Front Panel

• • • • Follow (Step 1) to (Step 5) of Item 10.3.
Step 1 Detach FFC cables at the connectors (CN2602,
CNP2101 & CNP2601) on Main P.C.B. and (CNP5904) on
SMPS P.C.B.
54