Replacement Of Voltage Regulator Ic (Ic2010) - Panasonic SA-AKX12PH Service Manual

Step 5 Detach 27P FFC at the connector (CN2706) on Main
P.C.B..
Step 6 Detach 9P FFC at the connector (CN2010) on Main
P.C.B..
Step 7 Remove Main P.C.B..
Caution: During assembling, ensure that earth plate is
bended flat against the Main P.C.B. properly when inserted
to locators.
8.12. Replacement of Voltage Regu-
lator IC (IC2010)
• Refer to "Disassembly of Main P.C.B.".
8.12.1. Disassembly of Voltage Regulator
IC (IC2010)
Step 1 Desolder pins of the Voltage Regulator IC (IC2010) on
the solder side of Main P.C.B..
Step 2 Remove 1 screw.
Step 3 Remove the Voltage Regulator IC (IC2010) from the
Main P.C.B..
Caution: Avoid touching the Heatsink due to its high tem-
perature after prolong use. Touching it may lead to inju-
ries.
39