Disassembly Of D-Amp P.c.b. & Speaker; Replacement Of Digital Amp Ic (Ic5100) - Panasonic SA-VK960GC Service Manual

10.19. Disassembly of D-Amp P.C.B.
& Speaker P.C.B.
• • • • Follow (Step 1) to (Step 5) of Item 10.3.
• • • • Follow (Step 1) to (Step 4) of Item 10.4.
• • • • Follow (Step 1) to (Step 6) of Item 10.8.
• • • • Disassembly of Speaker P.C.B.
Step 1 Remove 3 screws at the rear panel.
Step 2 Remove 2 screws from Speaker P.C.B.
Step 3 Remove Speaker P.C.B.
SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
• • • • Disassembly of D-Amp P.C.B.
Step 4 Remove 3 screws .
Step 5 Detach cable at the connector (CN5502) on D-Amp
P.C.B.
Step 6 Remove D-Amp P.C.B with Speaker P.C.B.
10.20. Replacement of Digital Amp IC
(IC5100)
• • • • Follow (Step 1) to (Step 5) of Item 10.3.
• • • • Follow (Step 1) to (Step 4) of Item 10.4.
• • • • Follow (Step 1) to (Step 6) of Item 10.8.
• • • • Follow (Step 1) to (Step 7) of Item 10.19.
Step 1 Desolder pins of the Digital Amp IC (IC5100) at the
reverse side of D-Amp P.C.B.
59