I.link Set Up - JVC HM-DT100U Instructions Manual

78
EN

i.LINK Set Up

•
Turn on the VCR and the TV, and select the AV
mode on the TV.
•
Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
VCR
CABLE
TV
/DBS
A E
ATTENTION:
If the i.LINK setting does not work, press [D-VHS] and [STOP
(L)] on the front panel simultaneously for more than 5
seconds to reset the settings. The cassette is automatically
ejected.
LINC
You can control one of the i.LINK-compatible devices
connected to this VCR with the i.LINK cable. "LINC"
means to select one of the connected devices. After
establishing a LINC with an i.LINK-compatible device,
you're ready to control the i.LINK device.
LINC (Logical Interface Connection) involves
establishing a logical connection, as the abbreviation
implies.
i.LINK set up for connected device
When you connect i.LINK compatible devices to this
VCR, an i.LINK device number is assigned to each device
in the order of connection.
If you want to change the number, follow the procedure
below.
A
B
C
D
B - D
E
F
NOTES:
•
If you do not want to set i.LINK device number, set "LINC" to
"OFF" in step C.
•
Use of i.LINK connection may not be possible depending on
the type of camcorders equipped with DV connector. In this
case, set "LINC" to "OFF" in step C.
•
Even if a LINC is established between this VCR and an i.LINK-
compatible device, the digital tuner signal of this VCR will not
be output to the device from the [i.LINK] connector.
OTHER USEFUL FUNCTIONS (cont.)
Access Main Menu screen
Press [MENU].
Access i.LINK Set Up screen
A Press [D E] to move the arrow to "INITIAL
SET UP", then press [G] or [OK].
B Press [D E] to move the arrow to "OTHER",
then press [G] or [OK].
Confirm LINC setting
Check that "LINC" is
set to "AUTO". If not,
press [FG] to move
the arrow to "LINC",
then press [D E] to
set to "AUTO".
Reset Number
Press [FG] to move
the arrow to "RESET
NUMBER", then press
[OK].
Return to normal screen
Press [MENU].
Set Number again
Connect the external devices one by one.
• Make sure to connect the VCR's AC power plug
to the AC outlet and turn on the external device
before connection.
• Each device will be numbered in the order of
connection.
FUNCTION SET UP TUNER SET UP INITIAL SET UP DIGITAL SET UP
CLOCK SET GUIDE CHANNEL OTHER
JLIP ID
1
LINC
AUTO
RESET NUMBER
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
FUNCTION SET UP TUNER SET UP INITIAL SET UP DIGITAL SET UP
CLOCK SET GUIDE CHANNEL OTHER
JLIP ID
1
LINC
AUTO
RESET NUMBER
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
EXIT SELECT