KYMCO SPIKE 125 Manual page 40

(8) BRAKE FLUID LEVEL INSPECTION /REFILLING
Remove the two screws from the brake fluid tank and take
off the cover.
Add recommended brake fluid DOT 4 into the tank until
the fluid level reaches the upper limit and then put on the
cover and tighten the screws.
Recommended Brake Fluid: DOT 4
CAUTION:
Do not mix brake fluid of different brands. It may cause
brake failure and is very dangerous. When refilling brake
fluid, use towels to cover and protect the painted and
coated surfaces. (Replace at 10000km or every year.)
(9) RUBBER COVER INSPECTION FOR WIRE AND
CABLE
The cable cores are protected by the rubber cover outside
the connector. Check the rubber cover frequently for
proper installation.
When washing the motorcycle, do not flush the rubber
cover directly or brush it. Use a wet rag to wipe off dirt
and dust.
Rubber Cover
Check Points
－ －
35