Editing; Edit To Or From Another Video Recorder - JVC HI-FI HR-J548E Instructions Manual

32
EN
Edit To Or
From Another
Video
Recorder
NUMBER "0"
MENU
PUSH JOG
AV2 SELECT Setting
1
Press MENU twice to access the Main Menu screen.
Press PUSH JOG %fi to move the highlight bar (pointer) to "MODE SET", then press OK.
2
Press PUSH JOG %fi to move the highlight bar (pointer) to "AV2 SELECT".
3
4
Press PUSH JOG
a–AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
5
Press MENU to return to normal screen.
If you have a decoder, be sure to set "AV2 SELECT" back to "DECODER" after editing.
If you're not using a decoder, leave "AV2 SELECT" set to "AV2".
The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was
removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using
a decoder, be sure to set "AV2 SELECT" back to "DECODER".
2
1 2 3
4 5 6
7 8 9
0
4
TV PROG.
OK
to move the highlight bar (pointer) to your choice:
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART connector to the
recorder's 21-pin SCART connector as illustrated on
page 33.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG. to select depending on the
connector being used — "AU-1" for the AV1 IN/OUT
connector, or "AU-2" for the AV2 IN/DECODER
connector.
When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (see below).
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTE:
All necessary cables can be obtained from your dealer.

EDITING

MODE SET
AUTO TIMER : OFF
O. S. D. : ON
B. E. S. T. : ON
AV2 SELECT : AV2
[5 ∞ ] = [ ] : AV2/DECODER
[MENU] : EXIT