Storing Channels Manually; Delete A Channel; Input Channel; Change Station Channel Position - JVC HI-FI HR-J548E Instructions Manual

40
EN

Storing Channels Manually

Store channels that were not stored during Auto Set Up (
or Auto Channel Set ( pg. 38).
ACCESS MAIN MENU
1
Press MENU twice.
ACCESS CONFIRMATION
SCREEN
2
Press PUSH JOG%fi to move the highlight bar (pointer)
to "MANUAL CH SET", then press OK. The Confirma-
tion screen appears.
SELECT POSITION
3
Press PUSH JOG% fi
which you want to store a channel begins blinking,
then press OK. The Manual Ch. Set screen appears.

INPUT CHANNEL

4
The number "01" appears blinking beneath "CH".
Press the NUMBER keys to input the channel number
you want to store.
For fine tuning adjustment, press PUSH JOG
the item beneath "CH" begins blinking, then press
PUSH JOG% fi . While tuning, "F+" or "F–" appears.
If necessary, to change the band between CH(regular)
and CC(cable), press PUSH JOG
blinking, then press PUSH JOG %fi to select the
band.
When storing a channel that sends scrambled
broadcasts, press PUSH JOG
setting) blinks, then press PUSH JOG% fi to set
"DECODER" to "ON" ("OFF" is the default setting).
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
To input the station name, see page 41.
To change positions, see "Change Station Channel
Position" (at right).
When Receiving A Scrambled Broadcast
Make sure that "AV2 SELECT" is set to "DECODER"
( pg. 32).
1– Perform steps 1 and 2 above.
2– Press PUSH JOG % fi
channel broadcasting the scrambled programmes, then
press OK three times.
3– Press PUSH JOG
blinking, and set it to "ON" by pressing PUSH JOG % fi.
4– Press OK to access the Confirmation screen.
Repeat steps 2 – 4 for each additional channel.
5– Press MENU.
until an open position in
until CH or CC is
until "OFF" (Decoder
to select the position of the
until "OFF (Decoder setting)" begins
Perform steps 1 and 2 of the previous procedure to access
the Confirmation screen before continuing.
pg. 4)

Delete A Channel

SELECT ITEM
1
Press PUSH JOG% fi
delete begins blinking.
DELETE CHANNEL
2
Press CANCEL.
The item directly beneath the cancelled one moves
up one line.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION
SCREEN
3
Press MENU.
until
Change Station Channel
Position
SELECT ITEM
1
Press PUSH JOG % fi
move begins blinking. Then press OK and the station
name (ID) and its channel (CH) number begin blinking.
SELECT NEW POSITION
2
Press PUSH JOG % fi
channel position, then press OK.
Example: If you moved the station in position 3 to
position 7, the stations originally in positions 4–7 each
move up one space.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION
SCREEN
3
Press MENU.
TUNER SET (cont.)
until the item you want to
until the item you want to
to move the station to the new