Connecting A Video Monitor, Etc; Equipped With An Analog Component Input Connector; Equipped With Dvi Input Connector - Sony EVI-H100V Operating Instructions Manual

• In the case of VISCA RS-232C
connection, make sure that the BOTTOM
switch is set to RS-232C (page 41).
• It is not possible to connect both VISCA
RS-232C and VISCA RS-422
simultaneously.
• Do not mix VISCA RS-232C (cross) and
VISCA RS-422 cables. Using these cables
at the same time may result in
malfunction.
Connecting a Video Monitor,
etc., Equipped with an Analog
Component Input Connector
EVI-H100V
VIDEO OUT
DVI to component
adapter cable
(not supplied)
to component
input
connector
HD video monitor, etc.
48
Connections
Notes
• Configure the, VIDEO FORMAT, based
• It takes about 7 to 16 seconds to display
DVI cable (not
DC 12 V
supplied)
Notes
• Configure the, VIDEO FORMAT, based
• Depending on the performance
on the specifications of the HD monitor.
the image.
Connecting a Video Monitor,
etc., Equipped with DVI Input
Connector
EVI-H100V
VIDEO OUT
to DVI
input connector
HD video monitor, etc.
on the specifications of the HD monitor.
capabilities of the DVI cable, some picture
noise may occur. In particular, be sure to
DC 12 V