Initial Start-Up - Webasto Air Top 2000 ST B Installation Instructions Manual

Initial start-up

Air Top 2000 ST
14 Initial start-up
After you have installed the heater, bleed the fuel supply system carefully.
NOTE:
As a result of the low fuel consumption the heater must be switched on
several times to fill the fuel line.
Until the fuel lines have been filled the heater may switch into a fault lock-
out for safety reasons - see chapter 15, "Fault lock-out".
Conduct a trial of the heater to check all the connections for leaks and to
ensure that they are secure. If the heater suffers a fault during operation,
the fault must be located and remedied.
70