Electrical connections
11.4. Control element connection
The wiring harness is prepared for connection to the control element.
Simply pull on connector housing to unplug the connector.
The connector housing can be locked (self-locking action) by simply pulling
on the wiring harness.
NOTE:
The fibre optic cable must be in contact with the rotary knob
NOTE:
As an option an external temperature sensor may be installed in the pas-
senger cabin (see page 50).
Fig. 26: Control element
62
Fig. 27: Installation of the control element
Fig. 28: Installation of the control element (incorrect)
Air Top 2000 ST