UTStarcom 6700 User Manual page 105

Use the Camera Settings screen
While capturing a still image or video clip using any capture
modes, tap the tool icon (
screen. The Camera Settings screen allows you to configure
the capture settings.
You can configure the following settings on the Camera Settings screen.
Setting
Capture mode
Capture format
Capture size
Capture frequency
Record limitation
Template
Browse
Direction
Stitch count
Burst count
Ambience
After you configure the settings, tap OK or Start Camera on the Camera Settings screen
to go back to the Camera screen.
) to access the Camera Settings
Allows you to
Select a capture mode.
Select a capture format.
Select a capture size.
Select a capture frequency.
Specify the maximum time or file size for recording.
Select a template.
Navigate to a folder containing templates.
Select a capture direction.
Select a count of snapped images.
Select a count of automatic capturing.
Select an ambience type.
Experiencing Multimedia
|
105