Installing Batteries - JVC HR-VCD1 Instruction Manual

Karaoke Features (cont'd)
Microphone
MIC select switch
FREQ. screw
To MIC input terminal 1 or 2
on the front panel.
Connector cable or Antenna cable

Installing Batteries

1
Unscrew and remove the battery
compartment cap.
22
How To Use
To use as a wired microphone
1
2
To use as a wireless microphone
1
2
Battery compart-
ment cap
ATTENTION:
When you are not using the microphone, it is recom-
mended to set the MIC select switch to OFF: otherwise the
batteries will discharge even when not in use.
2
Insert 2 "AA/UM-3"-size batteries
(provided) in the correct directions.
Insert the connector cable to the end of the Microphone
as illustrated and turn it clockwise to fix.
Set the MIC select switch to "WD. (Wired)".
Insert the antenna cable to the end of the microphone
as illustrated and turn it clockwise to fix.
Set the MIC select switch to "WL. (Wireless)".
3
Screw the cap back on.