Various Unique Functions - JVC HR-VCD1 Instruction Manual

Various Unique Functions

In order to operate by remote control, first press the VCD button.
Display of operations status
Press the OSD button on the remote control. By pressing
the OSD button, the following information may be easily
and quickly displayed or vanished on the television screen.
Time, Disc mode, Echo effect, Key control, Program, Repeat,
Random, Multiplexing, Vocal replace, Vocal masking
OSD
(Remote control)
Programming the track sequence you want
Preparation
It is not possible to enter programming mode during play.Verify
whether the Player is playing. If playing, stop the player with the
7 STOP button.
Operation
1. Press the PROGRAM button on the remote control to
enter the programming mode.
PROGRAM
2. Specify the disc by the DISC (1 through 3) button and
then the track by the number keys successively. You
can program up to nine (9) tracks by repeating this
procedure.
3. To play the programmed track press the 3 3 3 3 3 SELECT
button.
Notes :
• The track number playing, next track programmed, and
number of programmed tracks are displayed from the left-top
of the television screen. You may use the OSD button to
delete this information.
• Once the programmed track is played, it is deleted from the
program.
• You may continue to program even while the disc is playing.
2-1 1:30
(Television screen)
Canceling a programmed track
There are three (3) canceling functions (canceling the last
programmed track, canceling the current track, canceling
the next track to be played).
• To cancel the last programmed track press the CANCEL
button on the remote control and the last programmed
track will be canceled. This can be done while a disc is
playing.
PROGRAMMED SONGS
2-1 3-1
2-2 1-1
2-3 1-2
2-4 1-3
2-5
(Television screen)
• To cancel the current track press 7 7 7 7 7 STOP button.
• To cancel the next track, wait until the current track has
¢ NEXT button and the next ¢ ¢
finished and press the ¢ ¢
track will be canceled and the machine will go to the next
programmed track.
Note :
• To verify the track you programmed, stop the Player and see
ON SCREEN information.
Clearing a program
To delete all programmed tracks you have entered, press
the 7 7 7 7 7 STOP button and then the PROGRAM button. "PROG
OFF" will be displayed on the television screen.
STOP
Note :
• The Player does not cancel the track program even if the 7
(STOP) button is pressed. Pressing the 3 SELECT (PLAY)
button again causes the Player to resume playing from the
next track.
The number located lowest is the
latest track programmed.
PROGRAM
13