Power Unit Safety Devices - RHINO SM72 Operator's Manual

2.3 Power Unit Safety Devices

If transporting or operating the power unit and implement near a public roadway, the power unit must be
equipped with proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible
from the rear of the unit. Lights and an SMV emblem must be equipped directly on implements if the visibility
of the tractor warning signals are obscured.
Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were
removed for access to connect, service, or repair the power unit or implement. OPS-UPI- 0004
2.4 Hitch
The skid steer must be equipped with a compatible
Standard Universal Quick Mount Hitch to connect
and operate the mower. OPS-SS-0001
2.5 Auxiliary Hydraulics
The skid steer must be equipped with Front
Auxiliary Hydraulics.
capacity of the skid steer must match the
equipped mower drive motor. Reference the skid
steer operator's manual to determine the hydraulic
output specifications of the skid steer.
A decal is affixed to the mower designating the
mower as equipped with either a High, Medium, or
Low Flow Motor. If the decal is missing or is not
legible, the motor flow volume can be determined
from its part number (found on tag attached to the
motor) using the table below or by contacting
Rhino customer service.
The mower is not shipped equipped with hydraulic
hose coupler ends.
purchased from an authorized skid steer dealer to
ensure mower and skid steer auxiliary hydraulic
couplers are compatible.
SM72 02/10
© 2012 Alamo Group Inc.
OPERATION
The hydraulic output
Coupler ends must be
Operation Section 4-6