Table of Contents
Advertisement
Waypoint
5. Enter the appropriate coordinates using the cursor key and nu-
6. Move the cursor down and modify the waypoint number if you
Range & Bearing
7. Move the cursor down, and enter the symbol and name informa-
Version 2.0
light the desired datum and press the Select softkey. Refer to Ap-
pendix A - Datum List for a complete list of datums and their WGS
84 offset.
meric keypad.
wish. Otherwise the CDU assigns the next available number, begin-
ning at 1.
This feature allows you to create a range of waypoints within a
particular area. For example, you could put all of the waypoints for
fishing spots near Catalina Island in the range of 500 to 530, all the
waypoints for Cabo San Lucas in the range of 575 to 600, etc.
tion (optional). Use the techniques described in the Keypad &
Display Description section at the front of this manual.
Operator's Manual
Lat/Lon
51
Advertisement
Table of Contents
