Table of Contents
Advertisement
Datum List
Softkey Descriptions:
The softkeys can be displayed by pressing the E key first.
- Each time this soft key is pressed, the transponder channel selection is
changed. The following values are available:
- This softkey toggles the output mode between ADDRESSED or BROAD-
CAST. When addressed is selected, the MMSI number will be displayed
automatically when the TGT number is specified.
- Pressing this softkey sends the text message to the transponder for
broadcasting.
- Show more softkeys
- Pressing this key sends the number of people (specified in the AIS Voyage
setup) to the transponder.
- Pressing this softkey commands the transponder to send the Height Over
Keel as set in the AIS Static configuration screen.
Shows the previous softkeys
-
Note: Don't forget to press the E key to exit the editing mode.
Version 2.0
AUTO SELECT - transponder determines on which channel to
CHANNEL A - broadcast on channel A only
CHANNEL B - broadcast on channel B only
BOTH A & B - broadcast on both channels
broadcast the information
Operator's Manual
157
Advertisement
Table of Contents
